The first time you look at the pattern text of the woven labels, the pattern text is not the right size. At first glance, look at the woven labels pattern and text content. Are there any errors or errors? Of course, you can detect these low-level errors at the beginning of the release. When delivering a large item to a customer, there is no such simple error. Next, depending on whether the woven pattern text is normal. The actual effect of each graphic is exactly the same as the original or original image. This indicates that weaving is very successful, as it can start from the top of the graph to meet the customer’s needs. It is important to meet the customer’s needs with graphics and text, and if the text does not meet the customer’s expectations, this weaving is not enough. Customers can accept it.
The pattern requires not only the shape but also the size. The woven label?itself is small. The pattern size may require an accuracy of 0.05mm. The contrast with the original is unnatural. Of course, some customers accept the 0.05mm woven fabric requirement, but the 0.05mm difference is not enough and must be accurate. Since this woven label?is a long-term word-of-mouth communication, including brand, name, brand refinement and strict spiritual characteristics, and brand clothing has this woven way, it is more like tangible word-of-mouth advertising and intangible brand spirit carrier. Therefore, we cannot ignore the energy of the small weave, which is both professional and complex.
Second, look at the color of woven labels, and generally choose the color of the Pantone color system. All color comparisons are compared here to the original color or Pantone color of the design drawing, but this is not shown specifically and can only be determined by feeling.
Third, look at the density of woven labels. The weaving density is the weft density. The higher the weft density, the higher?the?woven labels?quality. Weft density refers to the number of woven labels in the midline range of 1CM. The finer the yarn, the finer the weave, the finer the weave, the higher the brand, the better the fabric. Threads are usually D thick, 100D relatively thick, 75D fine, 50D fine, 30D is the thinnest thread.
Fourth, look at the post-processing of woven labels. In the processing of woven labels, hot cutting (hot knife), super cutting (ultrasonic cutting), shear (all one, left and right fold into about 0.7CM), fold the crease (symmetric folding). This is a square braided board placed into an irregular pattern. This is to use a knife or laser gun open model, weaving warp) knitting on the clothes on the pulp (i.e., one of the barrels ivory barrels, knitting drying and air drying, and then weave dry syrup, woven label?is becoming more and more hard, ?marrow(It is the four sides of woven labels with the line close up to avoid to scatter edge in the future.)
These post-processing determine whether the post-processing process is punctual. The customer chooses which post-processing must meet the post-processing requirements. For example, don’t cut your hand to reach the cutting edge of the woven labels. Super cuts cannot be spread. The cuts must be organized neatly on both sides and not diagonally. Creases must be symmetrical, not long or short. The mold must be cut according to the pattern, and the pattern cannot be cut. In the over-pulp process, some customers need to finish the pulp, the weave is not too hard, the pulp machine needs less pulp, and the water gets thinner, so the water gets thinner. The seam cannot lock the seam line to the pattern.